NSX-V Part 10 - Configure VXLAN

By Sanjay Verma | May 25, 2020 | In Articles | Update: Jun 14, 2020 | Total Views [ 3433 ]

Taged In VMware NSX

(0 Like)

Rate

Hello Guys!!

We had discussed earlier in Session-8 about how to "Prepare Host and Add Host for NSX". Now we are going to discuss about how to Configure VXLAN.

Part 9 - Configure VXLAN

Go to Networking & Security - Go to Installation and Upgrade - Go to Host Preparation - Click on Create VXLAN

Select the DV Switch - Input the VLAN ID - Input the MTU as 1600 - IP Pool - Select vmkNIC Teaming Policy as Fail Over - Save

Now VXLAN has created as VXLAN is showing green from grayedout

Verify the VXLAN - Go to Network - Select DV Switch

Here can view the VXLAN status

===========================================================================================

Thanks for visiting here. Share this article if you found it useful.
Like Facebook Page https://www.facebook.com/VMwareInsight/
Connect to twitter https://twitter.com/imPranayK
Subscribe my Channel https://www.youtube.com/vmwareinsight
Connect over Linkedin https://in.linkedin.com/in/impranayk